Monday 14 May 2012

Handmade Monday: Weaving wire tutorial


Fossil bag charm sold



Butterfly key ring sold


This week I've been busy with an article for a magazine (watch this space for further details!) and a couple of sales, and today I'm in a competition. But I managed to fit in finishing a necklace and earring set using hammered and woven wire.  I've always found it tricky to get fine wire secured when starting off - this design solves that problem by having the links hammered first so that the thick wire is flattened which really makes it so much easier.


Here's a tutorial if you want to try it - a very straight forward if fiddly technique.

You'll need:
Thick wire - I've used 1m (18 gauge) here
Thinner wrapping wire - 0.4m (24 gauge) here
Pearls
Chasing hammer and block
Chain nose pliers

Step 1: Make the connector shapes in wire and hammer.  If you're making earrings, make sure you make and hammer two at the same time so they are identical and a mirror image of each other.

Be careful hammering the coloured and coated wires.  Try to tap them gently with the hammer covering the surface as evenly as possible.  More taps are better than a couple of hard knocks - you're less likely to scratch the coating.

If you have curves on your designs as I have here, you may need to readjust them after hammering.  Be careful using the pliers on hammered wire as the wire has been work hardened, but this means it is also more brittle.




Step 2: Get your thinner wire ready for the weaving.  You can work off the spool here to minimise wastage.  I've threaded on enough of the pearls for both earrings.

Look at the state of my steel block!  Really must give it a clean.  But like all tools, it seems to work better in the 'used' state ;-)That's my excuse for slovenly home economics anyway!




Step 3: Start to weave with the fine wire.  Leave a reasonable tail.  The more the thick wire connector has been hammered, the easier it is to make the thin wire stay in place.  Decide how many coils you want between each bead, but you may need to do a couple more for security at the beginning and end anyway.






Step 4: When you're ready for it, move the first bead or pearl up and gently manipulate the wire so that it's laying in the correct orientation. Continue the weave after the pearl in the same way






Step 5: Continue.  If you want to be really neat, make sure that you always keep the same pattern around the pearl.  So if the wire was coiled in front of the connector before the pearl, coil it back in front of the connector for the first coil after the pearl.







Step 6: When you're finishing off, make the same number of coils as at the top and snip your wire.  Neaten the ends of the coiling wire with the chain nose pliers so that the ends are tucked in at the back of the component.







 There's one done. Here are the finished earrings and necklace.  Can't quite decide which earrings I like best.  Some of the lovely folks on the Jewellery Maker facebook page helped me with designs, so they should get the credit for them really!







Earrings 1













Earrings 2


So which do you prefer?

Here's the link to see what others have been doing this week

24 comments:

  1. Thanks for the tutorial. I'll give it a go. In copper first, then silver. I like the horizontal earrings best as they seem to match well with the necklace.

    ReplyDelete
  2. I like the first set of earrings, but they are both beautiful.

    ReplyDelete
  3. A great tutorial - many thanks. Your work is really beautiful. Hope you have a good week.

    ReplyDelete
  4. Lovely tutorial - I love the necklace!!

    The magazine article sounds exciting - looking forward to hearing more about that x

    ReplyDelete
  5. brilliant tutorial, that necklace is gorgeous :)

    ReplyDelete
  6. Great tutorial. I prefer earrings 1, although I think they both look fantastic. I also rather like the necklace!

    ReplyDelete
  7. I love the necklace and prefer the second earing set. I hope the competition went well :)

    ReplyDelete
  8. such pretty jewelry, love how curvy they are

    ReplyDelete
  9. lovely jewelry, loving the curves

    ReplyDelete
  10. that looks great...I'll have to give it a try.
    Debbi
    -yankeeburrowcreations

    ReplyDelete
  11. Brilliant tutorial although a bit lost on me as a non-jewellery maker! I think I'm safer admiring from afar :-) X

    ReplyDelete
  12. I saved the page so maybe I can try it. I love both but I think I like the first earrings a little better. Really nice job and thank you for the tutorial.

    ReplyDelete
  13. Earrings 2 for me please:) Great tutorial - thank you for sharing it. Mich :)

    ReplyDelete
  14. Gorgeous jewellery but those first ear rings are my favourites!

    ReplyDelete
  15. Thanks for the tutorial. In a magazine, I hope we get to see which one.

    ReplyDelete
  16. Wow - that looks beautiful! As a non-jewellery maker, I'm fascintaed to see how you make it. Thank you for sharing it.

    ReplyDelete
  17. I've never tried wire work so I found the tutorial really interesting.
    Exciting news about the magazine, well done!

    LH
    x

    ReplyDelete
  18. Gorgeous as usual and brilliant easy to follow instructions - thankyou!

    ReplyDelete
  19. Gosh this looks complicated and very clever stuff! Good luck with the competition!
    Jo x

    ReplyDelete
  20. Thanks for sharing such wonderful pieces,simply superb..

    ReplyDelete
  21. Interesting and important information. It is really beneficial for us. Thanks

    ReplyDelete
  22. Gorgeous tutorial. I like both earring sets. It gives the buyer a choice if they want a set.

    ReplyDelete
  23. Thanks for sharing this great design. I can't decide which earrings I prefer--I really like them both.

    ReplyDelete

Please share your thoughts here - the more, the merrier! I've had to enable word verification because of the amount of spam comments - sorry, I know it's a pain!

Related Posts with Thumbnails