You will need:
Some wire - I used 20 gauge, 0.8mm antique bronze wire but you could experiment with different thicknesses
A mandrel or object to wind the wire round
Cup burr (optional)
About 15 minutes
Step 1: Start to wind your wire around the mandrel or cylindrical object. You can work off the spool for this project which means there is virtually no wastage. Can you see what I've used here? Actually, it's a chopstick! At about 6mm diameter, I've found it the perfect size to use with this thickness of wire and the fact that it's wood makes it a bit easier to grip than something metal or plastic, especially early on when you need to be firm with the wire.
Step 2: Slip the whole coil of wire off your mandrel. Then snip the wire three times at the appropriate points to make three equally sized coils.Try to snip so that the two cut ends are at the same place on the coil - this makes it much easier to hide the cut ends neatly at the end of the work. You can tidy the ends with a cup burr at this stage if you want to.
Step 3: Take two of your coils and hook one onto the other at right angles as in the diagram. You are going to start winding them together. It's the same action as putting your keys onto a slider keyring, except it is easier and you won't necessarily break any finger nails!
Step 4: When you've wound them both together, they'll look like this.
Step 5: Now take your third coil and begin to wind it on to one of the joined coils in exactly the same way as Step 3.
Step 6: When the three coils are all joined to together they look like this.
If there isn't room to manoeuvre the coils like this then you may have used a thickness of wire or size of mandrel that is inappropriate for this project. It's a bit like chain maille in that you don't know if it will work until you get a bit further on in the weave.
Step 8: Here's this final wind about half way through.
Step 9: Actually, you've finished and the knot should look a bit like this. At this point you can gently ease out the coils a bit, which will make the knot a little firmer. Try to tuck the ends inside the knot so they can't be seen too.
Step 10: The finished knot can be mounted on a wire or threaded directly on beading thread. Heck, it's your bead so you can do whatever you want with it now. There's a right way to put the wire or thread in the bead so that it sits properly - it's too complicated to explain in words, but you'll see what I mean as you try it out.
I like them on wire with a bead cap or spacer on each end to cover the hole and give stability.
These ones in antique bronze wire are probably destined to become a bracelet.
I love these bronze earrings with red creek jasper beads too.
Look on the web and you'll see some stunning examples of folk making these in semi precious wires and then threading one on a chain as a stunning, understated necklace.
Why are they 'Danish' love knots? I've no idea. Some folk just call them love knots. But I like the idea of them being Danish - it's so trendy at the moment with The Killing and Borgen providing our Saturday night entertainment! You can't make them at the same time as watching, though, unless your Danish is so good that you don't really need the subtitles.
Hope you've enjoyed the tutorial. Here's a link to what my other handmade friends have been up to this week.